[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit ::
:: Volume 32, Issue 1 And 2 (1-2020) ::
J Islam Dent Assoc Iran 2020, 32(1 And 2): 12-20 Back to browse issues page
Shear Bond Strength of Porcelain Veneering to Nickel-Chromium, Chromium-Cobalt, Zirconia and Lithium Disilicate
Davood Bahri1, Sayed Khatiboleslam Sadrnezhaad2, Sara Koosha *3, Najmeh Najmoddin4
1- MSc Biomaterial Student, Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2- Professor, Department of Materials science and Engineering, Sharif University of Technology, Tehran, Iran
3- Assistant Professor, Prosthodontics Department, Member of Implant Research Center, Dental Branch of Tehran, Islamic Azad University, Tehran, Iran , koosha_sa2003@yahoo.com
4- Assistant Professor, Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Abstract:   (663 Views)
Background and Aim: High chipping rates of the veneering porcelain in zirconia ce-ramic restorations have been reported in many clinical studies. However, information on the bonding behavior of veneering porcelain to zirconia and lithium disilicate frameworks is limited. The purpose of this study was to evaluate the bond-ing strength of porcelain veneering to zirconia, lithium disilicate, nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) alloys.
Materials and Methods: In this in vitro experimental study, core specimens were fabricated with 12 mm height and 11 mm diameter, and veneering specimens were fabricated with 7 mm height and 5 mm diameter according to the manufacturer’s in-structions in four groups (n=12) as follows: Group I: Ni-Cr alloy, group II: Co-Cr alloy, group III: lithium disilicate, and group IV: zirconia. The shear bond strength (SBS) test was performed in all samples with a universal testing machine with a crosshead speed of 0.5 mm/min. The fractured samples were examined under a stereomicroscope (×10) to determine the mode of failure. The results were analyzed by one-way ANOVA (P<0.05).
Results: Maximum SBS was recorded in group IV (zirconia; 34.6 MPa) followed by groups II (Co-Cr; 30.66 MPa), I (Ni-Cr; 30.58 MPa), and III (lithium disilicate; 20.05 MPa). One-way ANOVA revealed no significant difference between the study groups (P=0.174).
Conclusion: The SBS of porcelain veneering to zirconia, lithium disilicate, Ni-Cr, and Co-Cr alloys was not significantly different.
Keywords: Dental Porcelain, Dental Bonding, Zirconium Oxide, Shear Strength
Full-Text [PDF 742 kb]   (284 Downloads)    
Type of Study: Orginal | Subject: Porosthodontics
1. Cattell MJ, Clarke RL, Lynch EJ. The transverse strength, reliability and microstructural features of four dental ceramics-Part I. J Dent. 1997 Sep;25(5):399-407.
2. Graham JD, Johnson A, Wildgoose DG, Shareef MY, Cannavina G. The effect of surface treatments on the bond strength of a nonpre-cious alloy-ceramic interface. Int J Prosthodont. 1999 Jul-Aug;12(4):330-4.
3. López-Mollá MV, Martínez-González MA, Mañes-Ferrer JF, Amigó-Borrás V, Bouazza-Juanes K. Bond strength evaluation of the veneering-core Ceramics bonds. Med Oral Patol Oral Cir Bucal. 2010 Nov 1;15 (6):919-23.
4. Sundh A, Molin M, Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater. 2005 May;21(5):476-82.
5. Özkurat Z, Kazazolu E, Ünal A. In vitro evaluation of shear bond strength of veneering ceramics to zirconia. Dent Mater J. 2010 Mar; 29(2):138-46.
6. Heidari B, Ariamanesh H, Javadi N, Khazaee S, Khalesi M. Evaluation of influence of firing cycle numbers on shear bond strength in three all-ceramic systems. J Mash Dent Sch. 2014; 37(4):301-8.
7. Komine F, Saito A, Kobayashi K, Koizuka, Koizumi H, Matsumura H. Effect of cooling rate on shear bond strength of veneering porcelain to a zirconia ceramic material. J Oral Sci. 2010 Dec;52(4):647-52.
8. Ahmad Tarib N, Anuar N, Ahmad M. Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments. J Adv Prosthodont. 2016 Oct;8(5):339-44.
9. https://www.vita-zahnfabrik.com/index_en. html.
10. Ereifej N, Rodriguesc FE, Silikas N, Watts DC. Experimental and FEshear-bonding strength at core/veneer interfaces in bilayered ceramics. Dent Mater. 2011 Jun;27(6):590-97.
11. Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core–veneer interface in bi-layered ceramics. J Prosthet Dent. 2004 Apr;91(4):349-55.
12. Choi BK, Han JS, Yang JH, Lee JB, Kim SH. Shear bond strength of veneering porcelain to zirconia and metal cores. J Adv Prosthodont. 2009 Nov;1(3):129-35.
13. Albakry M, Guazzato M, Swain MV. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent. 2003 Mar;31(3):181-8.
14. Nakamura T, Wakabayashi K, Zaima C, Nishida H, Kinuta S, Yatani H. Tensile bond strength be-tween tooth-colored porcelain and sandblasted zirconia framework. J Prosthodont Res. 2009 Jul;53(3):116-9.
15. Fischer J, Grohmann PH, Bogna Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mater J. 2008 May;27(3):448-54.
16. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Micro-tensile bond strength of different components of core veneered all-ceramic restorations. Part 2: Zirconia veneering ceramics. Dent Mater. 2006 Sep;22(9):857-63.
17. De Melo RM, Travassos AC, Neisser MP. Shear bond strengths of a ceramic system to alterna-tive metal alloys. J Prosthet Dent. 2005 Jan;93(1):64-9.
18. Kelly JR, Giordano R, Pober R, Cima MJ. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990 Sep-Oct;3(5):430-40.
19. Ayako S, Futoshi K, Blatz M. A comparison of bond strength of layered veneering porcelains to zirconia and metal. J Prosthet Dent. 2010 Oct; 104(4):247-57.
20. Dundar M, Ozcan M, Gokce B, Comlekoglu E, Leite F, Valandro LF. Comparison of two bond strength testing methodologies for bilayered all-ceramics. Dent Mater. 2007 May;23(5):630-6.
21. Armstrong S, Geraldeli S, Maia R, Raposo LH, Soares CJ, Yamagawa J. Adhesion to tooth structure: a critical review of “micro” bond strength test methods. Dent Mater. 2010 Feb; 26(2):e50-62.
Send email to the article author

Add your comments about this article
Your username or Email:


XML     Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bahri D, Sadrnezhaad S K, Koosha S, Najmoddin N. Shear Bond Strength of Porcelain Veneering to Nickel-Chromium, Chromium-Cobalt, Zirconia and Lithium Disilicate. J Islam Dent Assoc Iran. 2020; 32 (1 and 2) :12-20
URL: http://jidai.ir/article-1-2098-en.html

Volume 32, Issue 1 And 2 (1-2020) Back to browse issues page
Journal of Islamic Dental Association of Iran


This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License which allows users to read, copy, distribute and make derivative works for non-commercial purposes from the material, as long as the author of the original work is cited properly

Persian site map - English site map - Created in 0.04 seconds with 30 queries by YEKTAWEB 4299